Vision Fitness T8100 Informations techniques télécharger pdf (Page 61)

TX Utilities Manual Communications processor console utility: cpcon

[si] Serial interface commands

Use [si] commands to view the current configuration of the serial interface. The

following table lists the [si] commands:

[si] commands Description

siregs Show all registers related to serial interface.

sitbl Show the current SI RAM tables (Rx and Tx).

shadow Show the shadow SI RAM tables (Rx and Tx).

si1ram Modify the SI 1 RAM (whichever half is not active).

si2ram Modify the SI 2 RAM (whichever half is not active).

si1reg Modify the SI 1 register.

si2reg Modify the SI 2 register.

[slog] System log commands

The TX system log provides the following types of logging: alarms, printf, and trace.

Each type of logging is managed separately. Log records are stored on the TX board

until they are forwarded to a host-based collection utility. The txalarm utility collects

alarm logs. The printf and trace log entries are used only during development.

The following table lists the [slog] commands:

[slog] commands Description

alarm Displays all alarm logs.

info Displays logging control information.

printf Displays all printf logs.

ring Displays ring information.

stalog Displays ring state/event log.

stats Displays statistics and optionally zeros them.

trace Displays all trace logs.

Dialogic Corporation 61

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 74 75

Pas de commentaire

Vision Fitness T8100 Informations techniques Page 61