Vision Fitness T8100 Informations techniques télécharger pdf (Page 65)

TX Utilities Manual Communications processor console utility: cpcon

[t81] Diagnostic interface to T8100 chip

The [t81] command set is available on TX 4000 Series boards.

T8100 commands provide a direct interface to the H.100/H.110 switching hardware,

which is controlled through the T8100 chip on the TX board. These commands help

you analyze TDM connections established with the tdmcfg utility, the txconfig utility,

the TX SWI library, and the TDM libraries, including commands entered through the

t1demo application.

This topic presents:

• [t81] commands

• TDM pattern test commands

[t81] commands

(TX 4000 Series boards)

Description

check Checks received patterns across the stream range. Used to test

H.100/H.110 or T1/E1 connectivity to another TX board. Refer to TDM

pattern test commands on page 66.

ctldb Displays the Ctrl db.

fallback Forces into clock fallback mode or returns to normal.

info Displays top-level T8100 control information.

local Displays all currently defined local connections.

looptrunks Loops all T1/E1 trunks back on themselves.

reflect Reflects timeslots across a given stream range. Used to test H.100/H.110

or T1/E1 connectivity to another TX board. Refer to TDM pattern test

commands on page 66.

spread Spreads patterns across a stream range. Used to test H.100/H.110 or

T1/E1 connectivity to another TX board. Refer to TDM pattern test

commands on page 66.

stats Displays statistics on the T8100.

status Displays the current status of the T8100.

vreflect Verifies CAM (content addressable memory) definitions (reflecting

timeslots). Used to test H.100/H.110 or T1/E1 connectivity to another TX

board. Refer to TDM pattern test commands on page 66.

vspread Verifies CAM definitions (spreading patterns). Used to test H.100/H.110 or

T1/E1 connectivity to another TX board. Refer to TDM pattern test

commands on page 66.

Dialogic Corporation 65

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 74 75

Pas de commentaire

Vision Fitness T8100 Informations techniques Page 65