Vision-fitness X6850HRT Manuel d'utilisateur télécharger pdf (Page 27)

X6850HRT

USING CUSTOM PROGRAMS

The CUSTOM programs allow five

separate workout choices to be set

and then stored for future use.

Setup for the CUSTOM programs

begins just as any other program.

The user will push the CUSTOM

program key, set age, set time, and set weight. At this point, the console

will ask the user to select one of five CUSTOM programs. If the programs

have not yet been set, the user can follow these setup instructions:

1. Use the arrows to select one of five CUSTOM programs.

2. Press ENTER to select.

3. The dot on the bottom left corner of the dot matrix will now be

flashing. Use the UP

▲

or DOWN

▼

arrow to adjust the resistance

of the first segment to your desired setting.

4. Push ENTER to select.

5. Continue setting each segment until all 15 segments have been set.

6. When you press ENTER after the final segment, you will now have

the option of setting your incline levels.

7. Use the UP

▲

or DOWN

▼

arrow to adjust the incline of each segment.

8. Press ENTER to select.

9. Continue setting each segment until all 15 segments have been set.

10. Press START to begin.

Each program will remain saved in the console’s memory and can be used

over again.

If the CUSTOM programs have already been saved, you have two

options:

1. Press START to begin the program as it has been set.

2. Press ENTER to begin resetting each segment for a new program.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Pas de commentaire

Vision-fitness X6850HRT Manuel d'utilisateur Page 27