Vision Fitness Treadmill T9500HRT Manuel d'utilisateur télécharger pdf

HARDWARE INCLUDED

Screwdriver

TOOLS, HARDWARE, & PARTS INCLUDED

PARTS BOX

Water Bottle, Qty: 1

Heart Rate Chest Strap, Qty: 1

Color-coded Hardware Bags

Owner’s Guide

Assembly Guide

Warranty Card

Allen Wrench

ORANGE BAG

BLUE BAG

M8 x 135L Bolts

Quantity: 4

M8 x 15L Bolts

Quantity: 4

Assembly

Guide

T9500HRT AND T9700HRT

PLATFORM TREADMILLS

AG18.12PRD

REV3 Mar.03.04

M8 x 55L Flathead Bolts

Quantity: 4

YELLOW BAG

M4 x 12L Panhead Screws

Quantity: 6

M8 x 20L Bolts

Quantity: 2

5mm L-Shaped Wrench

STEP

Once the treadmill is plugged in, you need to perform an Auto-Calibration to assure maximum performance.

MODELS T9500HRT:

DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION

• You need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please

hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "USEr" displays in the center

window. To access the data press the ELEVATION keys until "Auto" appears in the center window. Press Start to

select this function.

• To begin Auto-Calibration, press START. The treadmill will run through minimum and maximum Speed and

maximum Elevation. This will take 3-5 minutes. Let the treadmill perform this complete function before exiting the

Engineering Mode.

• Elevation A/D or Elevation in % appears in the left window. PWM value or Speed appears in the right

window. "End" will appear in the center window when the Auto-Calibration is complete. When Auto-Calibration

is complete, it will take the treadmill about 30 seconds to go to 0% Elevation and return to the start-up screen

with “P1” showing in the Function window.

MODELS T9700HRT:

DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION

• You need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please

hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "User Mode" appears in the

alphanumeric window. To access the data press the ELEVATION keys until "Auto-Cal" appears. Press Start to select

this function.

• To begin Auto-Calibration, press START. The treadmill will run through minimum and maximum Speed and

maximum Elevation. This will take 3-5 minutes. Let the treadmill perform this complete function before exiting the

Engineering Mode.

• Elevation A/D or Elevation in % appears in the left window. PWM value or Speed appears in the right

window. "Cal Passed" will appear in the alphanumeric window when the Auto-Calibration is complete. The

treadmill will come to a complete stop and return to the start-up screen in the alphanumeric window.

AUTO CALIBRATION

1 2

Assembly 1

Résumé du contenu

Page 1 - Assembly

HARDWARE INCLUDEDScrewdriverTOOLS, HARDWARE, & PARTS INCLUDEDPARTS BOXWater Bottle, Qty: 1Heart Rate Chest Strap, Qty: 1Color-coded Hardware BagsO

Page 2

PLATFORM TREADMILLSAssemblyGuideTo avoid possible damage to this Platform Treadmill, please follow these assembly steps in the correctorder. Before pr

Commentaires sur ces manuels

Pas de commentaire

Vision Fitness Treadmill T9500HRT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Tapis de course Vision Fitness Treadmill T9500HRT. Vision Fitness Treadmill T9500HRT User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Tapis de course Vision Fitness Treadmill T9500HRT