Vision-fitness X6100 Manuel d'utilisateur télécharger pdf (Page 9)

9

6

STEP

OPTIONAL

5

STEP

Dual-Action

Axle Cover

Link Arm

Covers

5

STEP

• On the right side, slide the dual

action axle cover into place on the axle

located on the console mast. Slide a

wavy washer (M25.5x34x2t) onto the

axle. Slide the right dual action arm

into place on the axle. Fix in place with

the washer (M8x35x2t) and locknut

(M8). Cover with the included nut cap.

• Make sure the bushing is in place in

the socket joint of the lower link arm.

Connect the lower link arm to the dual

action arm with a screw (M8x30L),

washer (M8.2x16.1.5T), and nut

(M8). Tighten with the 6

MM

Allen wrench

and 13

MM

wrench.

• Position the link arm cover into place

over the joint of the lower link arm and

Secure the two pieces of the cover

together by inserting and tightening a

panhead screw (M4x15L). Connect

the cover to each side of the lower link

arm with a washer (M5x10x1t) and

screw (M5x10L).

• Repeat these steps on the left side.

BLACK BAG

6

STEP

• NOTE: Elliptical Trainer cannot be

folded with the child safety guards in

place.

• Line up the grooves on the child

safety guards with the screws on the

guide rails. Slide the safety guard into

place on the guide rails. Tighten the

screws with the Phillips screwdriver to

lock in place.

SAFETY GUARDS

OPTIONAL

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire